Turned Spheres
Category: Member’s Project
End Table with Kumiko Panels
Hickory End Table: dimensions – 35″ wide x 9″ deep x 25″ high, finish – lacquer (white & clear topcoat). This table is my first original design (that is, I came up with the overall form without consciously working off …
Robot Box
I made this box for my son for his birthday. The carcass of the box is made from a block of wood, similar to bandsaw box but made with table saw. The decorative pieces are milled from scraps laying around …
Kumiko Coasters
After creating the kumiko panels for my current end table project, I had an opportunity to give kumiko a try again: I made a pair of coasters as a gift. They are about 3-7/8″ square, and I designed the square …
Collapsible Leg Bench
We needed a bench to make dressing in our closet. Since the space is limited it needed to be as compact as possible. I decided to make a bench with legs that folded into the top apron. The bench is …
Dresser
I built a 5-drawer dresser out of dark walnut and 3/4″ red oak plywood (stained white). Finishing was done with homemade wipe-on polyurethane. About 4 coats for the dresser and drawers and about 8 for the top. Carcass is 3/4″ …
Rack for Turning Tools
I am getting into turning lately and built up a good selection of turning tools in my shop. To organize and make the tools easily reachable while turning, I created this 44-3/4″-wide tool rack on the wall right behind my …
A Bandsaw Box
I made this bandsaw box after attending [brwc_user id=”3″ nolink=true]’s skill topic in Sept. 2018.
Formal Dining Room Chairs – Completed
During the January 2019 Meeting, I showed the prototype of my dining room chair prototype (see here). Since then, I have completed the build of 8 dining room chairs based on the prototype. The photo above captures them in the …
Rustic Mirror Frame
OLYMPUS DIGITAL CAMERA
One of the two cypress mirror frame that I built for my sister’s bathroom